Windmill Data Acquisition Software Logo
20 May 2023

Windmill Software
Data Acquisition Intelligence
Call now: +44 (0)161 834 6688


ComDebug Settings for an Advanced Energy Pinnacle 6 kW DC Power Supply

For information on what each of the settings means, see the Serial Driver Settings Overview

Windmill software lets you continually log data from Advanced Energy Pinnacle 6kW DC Power Supplies, and other instruments with an RS232 serial port, on a PC running Windows. All data is time-stamped and can be imported into Excel either during or after data collection. Our Windmill with the COMIML software is currently reduced from £145 to £50. Alternatively, subscribers to the Monitor newsletter (ISSN 1472-0221) can download free logging software: ComDebug. This lets you log data from one instrument and save it in a text file.

  1. Run the Windmill ComDebug program and enter your balance's settings.
  2. Run the Windmill DDE Panel, Logger or Chart program to save or display data from your balance.

After you have entered your configuration settings with ComDebug, you don't need to use this again and can go straight to the logging and display programs. More details on entering the configuration settings are below.


Advanced Energy Pinnacle 6 kW DC Power Supply

Read this in conjunction with the Getting started with ComDebug and COMIML Serial Driver page.

COM Port Settings

Comm Port: Select the port to which your instrument is connected.
Baud Rate: 19200
Parity: Odd
Stop Bits: 1
Flow Control: None

Instrument Timing

Read: Directly
Timeout: 1000 ms
Instrument Idle or Wait Time: 0 ms
Data Persistence Time: 1000 ms

Further Information:
Windmill Serial Port Driver Settings
Getting Started with ComDebug and COMIML
COM Port Settings